ds-126 rev d 5.1 voltage controlled crystal oscillator technical data saronix s1300 / s1309 series 3.3v, hcmos frequency range: actual size description a 3.3v, voltage controlled crystal oscil- lator designed primarily to be used in phase locked loops, phase shift keying, jitter reduction and other telecommuni- cation applications. the hcmos output can drive both high speed cmos and ttl loads. devices are packaged in stan- dard 14-pin dip compatible all metal, resistance welded packages. pin 7(4 on 1/2 size) is grounded to reduce emi. 1.5 mhz to 28.6363 mhz frequency stability: 20, 25 or 50ppm over all conditions: operating temperature, voltage change, load change, calibration tolerance, shock and vibration, with v c = 1.65v applications & features ? 3.3 volt operation hcmos / ttl compatible 3.5ps max rms period jitter wide range of performance options available: 50 to 100ppm apr*; 20 to 50ppm frequency stability tri-state version available gull wing for ir reflow available output waveform t r t f cmos symmetry 80% v dd 50% v dd 20% v dd logic 0 logic 1 * apr = (vcxo pull relative to specified output frequency) ? (vcxo frequency stability) temperature range: operating: storage: 0 to +70c or -40 to +85c -55 to +125c supply voltage: recommended operating: 3.3v 10% supply current: output drive: symmetry: rise & fall times: logic 0: logic 1: load: jitter: 45/55% max @ 50% v dd 9ns max 20% to 80% v dd 10% v dd max 90% v dd min 30pf 3.5ps max rms period jitter pull characteristics: input impedance (pin 1): frequency response (-3db): pullability: control voltage: transfer function: linearity: center control voltage: 50k ? min 10 khz min 50, 70, 100ppm apr* min 0.3 to 3.0v frequency increases when control voltage increases 5 or 10% max 1.65v environmental: mil-std-883c, method 1014, condition c mil-std-883c, method 1014, condition a2 mil-std-883c, method 1011, condition a mil-std-883c, method 1004 gross leak test: fine leak test: thermal shock: moisture resistance: mil-std-883, method 2002, condition b mil-std-883, method 2003 mil-std-202, method 211, conditions a & c mil-std-883, method 2007, condition a mil-std-202, method 215 mil-std-202, method 210, conditions a, b or c ( i or j for gull wing) mechanical: shock: solderability: terminal strength: vibration: solvent resistance: resistance to soldering heat: 10ma typ, 15ma max saronix 141 jefferson drive menlo park, ca 94025 usa 650-470-7700 800-227-8974 fax 650-462-9894 aging @ 25c: 3ppm max per year, 10ppm max for 10 years
s1300 / s1309 series saronix voltage controlled crystal oscillator technical data 3.3v, hcmos ds-126 rev d 5.2 all specifications are subject to change without notice. stability tolerance aa = 20ppm, 0 to +70c a = 25ppm, 0 to +70c b = 50ppm, 0 to +70c e = 50ppm, -40 to +85c package details part numbering guide 5.08 .200 max .46.08 .018.003 0.91 .036 max 7.62.20 .300.008 7.62.20 .300.008 pin 5 output pin 8 v dd pin 1 control voltage pin 4 gnd case (v ss ) scale: none (dimensions in ) mm inches saronix denotes pin 1 half size package saronix vcxo denotes pin 1 pin 3 pin 1 pin 7 7.75 .305 pin 12 pin 14 15.24.13 .600.005 5.08 .200 max 6.350.51 0.250.02 3.94.25 .155.010 .46.08 .018.003 21.0 .825 max 0.91 .036 13.0 .510 max tri-state logic table (4) glass insulators pin 8 pin function: pin 8: output pin 12: n/c (optional) pin 14: +3.3 vdc (v dd ) pin 1: control voltage pin 3: tri-state control (optional) pin 7: gnd/case (v ss ) marking format ** includes date code, frequency & model 13.0 .510 max 6.350.51 0.250.02 13.0 .510 max frequency (mhz) saronix blank = non tri-state t = tri-state supply voltage s t 130 9 a a a j - 19.4400 lead/package types blank = thru-hole j = gull wing linearity a = 5% b = 10% pullability (minimum apr) ** a = 50 ppm m = 70 ppm b = 100 ppm, not available at all frequencies 130 = 3.3v pin 3(2) input logic 1 or nc logic 0 or gnd pin 8(5) output oscillation high impedance required input levels on pin 3(2): logic 1 = 70% v dd min logic 0 = 30% v dd max ma m power supply v m oscillator v dd out gnd pin 14(8) pin 8(5) pin 1(1) * pin 7(4) pin 3(2) test point optional tri-state control voltage note a: c l includes probe and fixture capacitance * items in brackets( ) represent half size model c l (note a) = 30pf test circuit max marking format ** includes date code, frequency & model ** exact location of items may vary max 2.54 .100 pin 2 optional tri-state control saronix 141 jefferson drive ? menlo park, ca 94025 usa 650-470-7700 800-227-8974 fax 650-462-9894 package size 0 = full size 9 = 1/2 size ** apr = (vcxo pull relative to specified output frequency) ? (vcxo frequency stability)
|